High voltage shunt power capacitor is a simple and reliable reactive power compensation electrical component,which can improve the power factor of the power system and reduce the voltage drop, reduce losses and improve power transmission capacity. The capacitors used in power factor correction and harmonic filtering high-pressure system.
- Brief introduction
- Innovative Features
- Parameter
- Controller parameters
- Similar products
Structure
The dielectric structure is of the whole thin-film.The dielectric is immersed in a polypropylene foil synthesis solution,the solution is a harmless synthetic liquid environmentally. Aluminum foil electrodes, the structure can minimized the loss of the capacitor.
A capacitor unit consists of many components assembled to form a capacitor. It can provide internal fuse according to user’s requirements.Each unit connected to a capacitor discharge resistor.By internal discharge resistor, the capacitor voltage can be decreased within 10 minutes to 75 V.All three-phase and single-phase capacitors enclosed in a metal housing, providing output capacity through the electrode casing.
Capacity: 50-700Kvar (single capacitor)
Contains three-phase and single-phase capacitor, which can be used for indoor or outdoor installation.
According to IEC 60871-1, IEC 60871-2 and IEC 60871-4.
The low dielectric loss;
The box shell explosion resistant high specifications, to ensure the safety of property;
The insulating oil accord with the requirements of environmental protection, harmless to health and the environment;
Capacitance values change little with temperature;
Built-discharge resistor
Rated frequency: 50Hz or 60Hz
Average loss: less than 0.2W/Kvar
The whole film Dielectric: polypropylene film
Insulating oil: non-chlorinated biphenyls, nontoxic
In the long run capacitor allows 1.1 times the rated voltage
Due to over-voltage capacitors and allows higher harmonics caused by the effective value of 1.3 times the rated current under steady-state operation of a continuous overcurrent
Capacitance deviation does not exceed the rating of -3% to +3%
Built-discharge resistor
Standard: IEC60871
|
Type |
Voltage（KV） |
Power output（Kvar） |
Weight |
|
GC5-066-100I |
6.6 |
100 |
29.8 |
|
GC5-066-200I |
6.6 |
200 |
44.8 |
|
GC5-066-300I |
6.6 |
300 |
64.8 |
|
GC5-066-400I |
6.6 |
400 |
87 |
|
GC5-066-500I |
6.6 |
500 |
100.6 |
|
GC5-066-150D |
6.6 |
150 |
48.9 |
|
GC5-066-200D |
6.6 |
200 |
60.9 |
|
GC5-066-250D |
6.6 |
250 |
71.3 |
|
GC5-110-100I |
11 |
100 |
29.8 |
|
GC5-110-200I |
11 |
200 |
44.8 |
|
GC5-110-300I |
11 |
300 |
64.8 |
|
GC5-110-400I |
11 |
400 |
87 |
|
GC5-110-500I |
11 |
500 |
100.6 |
|
GC5-110-100D |
11 |
100 |
42.5 |
|
GC5-110-150D |
11 |
150 |
45.0 |
|
GC5-110-250D |
11 |
250 |
60.0 |
|
GC5-110-300D |
11 |
300 |
69.0 |
